|
This is a fast rise time circuit. It will trigger almost all types of instrumentation.
Pulse amplitude is determined by battery voltage. When using "MAKE" screens with shaped charge jets, use 90V battery supply. 50 O attenuators may be use to lower instrumentation input signal.
Caution: Some instruments can not handle voltages as high as 90V.
An attenuator should be used in cable for
instruments requiring lower voltages in.
Wire form circuit to screen can be twisted pair or RG58U Coax Cable.
Due to hydroscopic property of paper possibly causing a "short" in the circuitry, these screens are also available on polyester type materials. |
